Geotechnical Engineering Group

Department of Civil & Structural Engineering

Publications

2017

(2017). Predicting the role of geotechnical parameters on the output from shallow buried explosives. International Journal of Impact Engineering, 102 (21-22), pp. 117-128. (Full Text).
(2017). Bearing capacity charts of soft soil reinforced by deep mixing. Proceedings of the Institution of Civil Engineers. Ground Improvement, 170 (1), pp. 12-25.
(2017). Performance of PIV and PTV for granular flow measurements. Granular Matter, 19 (01-Feb), (Full Text).
(2017). Large-scale physical modelling of soil-filled masonry arch bridges. International Journal of Physical Modelling in Geotechnics, pp. 1-14. (Full Text).

2016

(2016). Development and calibration of a sand pluviation device for preparation of model sand bed for centrifuge tests. In Proceedings of the 3rd European Conference on Physical Modelling in Geotechnics (EUROFUGUE) (pp. 73-79). (Full Text).
(2016). Design of a partially confined split Hopkinson pressure bar. In Proceedings of 24th International Symposium on Military Aspects of Blast and Shock.
(2016). Development and modification of National Instruments Data Acquisition hardware for use in the centrifuge environment. In Proceedings of the 3rd European Conference on Physical Modelling in Geotechnics (EUROFUGUE) (pp. 117-123). (Full Text).
(2016). Experimentation and modelling of near field explosions. In Proceedings of the 24th Military Aspects of Blast and Shock (Full Text).
(2016). Centrifuge Health Monitoring of the 50gTon beam centrifuge at the University of Sheffield. In PROCEEDINGS OF THE 3rd EUROPEAN CONFERENCE ON PHYSICAL MODELLING IN GEOTECHNICS (EUROFUGE 2016), NANTES, FRANCE, 1-3 JUNE 2016: ISBN 978-2-85782-716-0 (pp. 123-129).
(2016). Localised variations in reflected pressure from explosives buried in uniform and well-graded soils. In Proceedings of the 24th Military Aspects of Blast and Shock (Full Text).
(2016). Measuring spatial pressure distribution from explosives buried in dry Leighton Buzzard sand. International Journal of Impact Engineering, 96 (2), pp. 89-104. (Full Text).
(2016). Centrifuge modeling of energy foundations – effect of seasonal temperature fluctuation and soil state. In PROCEEDINGS OF THE 3rd EUROPEAN CONFERENCE ON PHYSICAL MODELLING IN GEOTECHNICS (EUROFUGE 2016), NANTES, FRANCE, 1-3 JUNE 2016: ISBN 978-2-85782-716-0 (pp. 141-147).
(2016). Reflected pressures from explosives buried in idealised cohesive soils. In Proceedings of the 24th Military Aspects of Blast and Shock (Full Text).
(2016). Development of a 25ton consolidation press at the Centre for Energy and Infrastructure Ground Research. In PROCEEDINGS OF THE 3rd EUROPEAN CONFERENCE ON PHYSICAL MODELLING IN GEOTECHNICS (EUROFUGE 2016), NANTES, FRANCE, 1-3 JUNE 2016: ISBN 978-2-85782-716-0 (pp. 147-153).
(2016). Investigating high strain rate shear in soils using a split Hopkinson pressure bar. In 3rd UK Defence Seminar on the High Strain Rate Properties of Soils and Granular Media Dstl, Porton Down.
(2016). Experimental studies of the effect of rapid afterburn on shock development of near-field explosions. In Proceedings of the 24th Military Aspects of Blast and Shock.

Pages